CNC Carbide End Mill Cutter 3 Blade No Coating K30 YL10.2 Raw Material
KTC Tungsten Carbide End Mills for Aluminum
Types
Several broad categories of end- and face-milling tools exist, such as center-cutting versus non-center-cutting (whether the mill can take plunging cuts); and categorization by number of flutes; by helix angle; by material; and by coating material. Each category may be further divided by specific application and special geometry.
It is becoming increasingly common for traditional solid end mills to be replaced by more cost-effective inserted cutting tools (which, though more expensive initially, reduce tool-change times and allow for the easy replacement of worn or broken cutting edges rather than the entire tool).
End mills are sold in both imperial and metric shank and cutting diameters. In the USA, metric is readily available, but it is only used in some machine shops and not others; in Canada, due to the country's proximity to the US, much the same is true. In Asia and Europe, metric diameters are standard.
Specifications:
| Raw Material |
K30 / YL10.2 |
| TRS |
>4100N/mm2 |
| Hardness |
>91HRA |
| A.O.L |
50mm-150mm |
| Grain size |
0.8 μm |
| Upto |
HRC50 |
| Flutes No |
3F |
| Suitable for |
Aluminum,plastic and other materials |
Standard Sizes
| Size |
Flute Length of End Mills(mm) |
| Aluminum Use |
| D1*D4*50 |
3 |
| D1.5*D4*50 |
5 |
| D2*D4*50 |
6 |
| D2.5*D4*50 |
8 |
| D3*D4*50 |
9 |
| D3*D3*50 |
9 |
| D3.5*D4*50 |
11 |
| D4*D4*50 |
12 |
| D1*D6*50 |
3 |
| D1.5*D6*50 |
5 |
| D2*D6*50 |
6 |
| D2.5*D6*50 |
8 |
| D3*D6*50 |
9 |
| D3.5*D6*50 |
11 |
| D4*D6*50 |
12 |
| D6*D6*50 |
15 |
| D6*D6*50 |
18 |
| D7*D8*60 |
20 |
| D8*D8*60 |
24 |
| D10*75 |
30 |
| D12*75 |
35 |
| D14*100 |
45 |
| D16*100 |
45 |
| D18*100 |
45 |
| D20*100 |
45 |
| Flute Length of Extended End Mills(mm) |
| D3*D4*75 |
12 |
| D4*D4*75 |
16 |
| D5*D6*75 |
18 |
| D6*D6*75 |
25 |
| D8*75 |
30 |
| D3*D4*100 |
15 |
| D4*D4*100 |
20 |
| D5*D6*100 |
30 |
| D6*D6*100 |
30 |
| D8*D8*100 |
35 |
| D10*100 |
40 |
| D12*100 |
45 |
| D6*D6*150 |
40 |
| D8*D8*150 |
50 |
| D10*150 |
55 |
| D12*150 |
55 |
| D14*150 |
60 |
| D16*150 |
70 |
| D18*150 |
70 |
| D20*150 |
70 |
The process of production:
1. Order entry business arrangements, then prepared the raw material, sent to engineer to drawing.
2. The grinding to flat head and chamfering, or taper of the angle.
3. Inspector test the diameter, length, taper angle and tolerance of the material, then lasering.
4. Go to CNC machine working. Some time check the cutter when it producing.
5. Inspector test all of when the cutters finished.
6. If the cutters no need to coating, then we will package it sent to customer. If the cutters need to coating, we package it sent to coating.
- After coating back, inspector will check it. Then sent to customer.
Product Tags:
|
|
CNC Carbide End Mill Cutter 3 Blade No Coating K30 YL10.2 Raw Material Images
|
